儿童自行车骑行头盔轮滑盔平衡车头盔等头部防护装置出口欧美需要满足CE-PPE法规要求，标准EN 1080:2013

Materials材料设计要求
For those parts of the helmet coming into contact with the skin, the material used shall not be subject to any known appreciable alteration from contact with sweat or with substances likely to be found in toiletries.
对于头盔与皮肤接触的部分，所使用的材料不应因接触汗液或盥洗用品中可能发现的物质而发生任何已知的明显变化。
Materials shall not be used which are known to cause skin disorders or other adverse effects on health. For a material not in general use, advice as to its suitability shall be sought before its introduction.
不应使用已知会导致皮肤疾病或对健康有其他不利影响的材料。对于不普遍使用的材料，在其引入前应征询其适用性的意见。

The following list of documents is given for information and as examples of documents to be examined: 以下是材料审查的文件清单，以供参考:
a) materials specifications;材料规格书
b) safety data sheets relating to the materials; 与物料有关的安全数据表（例如有害物质检测报告）;
c) information relating to the suitability of the materials for use with food, in medical devices, or other relevant applications; 有关该材料是否适合用于食品、医疗器械或其他相关应用的信息;
d) information relating to toxicological, allergenic, carcinogenic, toxic to reproduction or mutagenic investigations on the materials; 有关该材料的毒理学、致敏性、致癌性、对生殖的毒性或致突变性调查的信息;
e) information relating to ecotoxicological and other environmental investigations on the materials. 有关该材料的生态毒理学和其他环境调查的信息。
The examination shall determine whether the claim that the materials are suitable for use in the protective helmet is justified. Particular attention needs to be paid to the presence of plasticisers, unreacted components, heavy metals, impurities and the chemical identity of pigments and dyes. 审查应当确定材料适合用于防护头盔的主张是否合理。需要特别注意增塑剂、未反应组分、重金属、杂质以及色素和染料的化学特性。
All metallic materials which could come into prolonged contact with the skin (e.g. buckles, studs, fittings) shall have an emission of nickel of less than 0,5 μg/cm per week. The method of test shall be according to EN 1811.
所有可能与皮肤长期接触的金属材料(如扣环、螺柱、配件)的镍排放量应低于0.5 μg/cm每周。测试方法应符合EN 1811。